Print Interrupt Timeout can be reset by the Administrator. Select the Manual Feed Shelf Bypass from the Copy screen above. Select the Update Printer button. Scan-to-Remote Printer Allows users to send scan jobs to a remote printer. See your System Administrator for more details on this feature.
Select the features to be set up from those displayed on the Advanced Settings tab. Placing all jobs on hold: 1. Select Machine Info from the Services screen. Refer to Select Custom Reduction and Enlargement in the System Administration chapter, for details on changing these custom presets percentages. Select the Media Series corresponding with the Media Source you intend to use.
Firmly close the Upper Unit until it latches. The Advanced Settings tab allows you to configure the layout, processing and finishing of your jobs output. Select Copy on the Services menu. The Media Series screen displays. If the paper jam is in Drawer 1, gently pull out the Media Drawer for Rolls 1 and 2 media.
Internal parts may have become soiled. The lower priority errors are clay-colored. The Select a Destination Mailbox screen displays. The Services menu screen displays. The Base File Name, or prefix, is used with the number indexing automatically for each scanned document that follows. For instance, when naming a mailbox, you may not use an apostrophe. The Machine Info screen displays.
If you notice any unusual conditions, contact your Xerox Customer Support Center. Lift the scanner handle to release the scanner unit to open. The following illustrations depict the scanner components that require cleaning. Load your cut sheet media into the Manual Feed-in Shelf, before loading the document into the Scanner. Cleaning the Machine This section instructs you on how to clean the machine. This is seen during Job Recall and is considered 100% of the document.
Select Close to return to the Copy Options menu. The Services menu will display with Scan to Mailbox as an option. If not, go to step 2. Select the Image Quality tab. Rotate the rolls as you clean them to ensure that the entire roll surface is clean. Cover the hole of the removed Waste Toner Bottle with the provided cap.
Wipe the Scanner Sensors with a dry, lint-free cloth. Repeat steps 4 through 6 to set up additional custom formats. Then enter the desired scan width using either the numbers keypad or the scroll buttons. Press the Services button on the Control Panel. Switch off the machine immediately and contact your Xerox Customer Support Center.
The minimum size original that can be fed is 6. Shutdown from Web Printer Management Tool 1. Rather, wait for the system to shut down. Select the Scan to Mailbox feature on the screen. Set Background Suppression to Enabled checked.
Select the Copy Options button. This will prevent the guides from falling off of the machine and getting damaged. The Select a Destination screen displays. The Document List selection displays the documents scanned to the Standard Mailbox selected. Select Close to return to the Administration menu. .