Win96 will still truncate or pad each entry to 12 characters, but no error messages will be issued if more characters are entered. They include various manuals on Realistic scanners including specifications, care and maintenance, schematics, and general scanning guides. Searching for Frequencies Search Delay Sometimes a user might pause before replying to a transmission. To turn lists on or off, press the list number on the top of the display 1-5. Pause Mode- the mode the radio is in while paused on a scan; service, limit, or tune search. The E in the display will blink. Service Bands The scanners also have 5 service bands pre-programmed with frequencies and 1 limit search to allow you to create your own search band.
The scanner displays this data as codes corresponding to the levels of severity L1, L2, and L3. Understanding Trunking Trunking systems let a large group of 2-way radio users or even different groups of 2-way radio users efficiently use a set of frequencies. Since these size codes require multiple blocks, you will be prompted for the next available block. To change the current monitor memory see. Initialize the scanner only when you are sure the scanner is not working properly.
If you have registered via check or money order and have not received your key, or have not received a response to an email query about your key,. However, some of this information may be outdated or changed by now so you should re-check the information before using it. Up to eight of the most recently opened or saved file names will be listed. There may be 3 or 4 frequencies assigned as primary or alternate control channels but only one control channel will be active at a time. Radio receivers are designed to reject signals that are not on the desired frequency, but they're not perfect. The scanner also has 10 temporary memory locations called monitor memory channels for both bank groups.
Note: This procedure clears all the information you have stored in the scanner. Connecting an Optional External Antenna. After about 5 seconds, you might hear a rushing sound. The idea is that you can set up a different folder for, say, each geographic location you might travel to, and by loading the correct folder your scanner is immediately able to start scanning the appropriate frequencies. I typically put my trunking frequencies in starting at the beginning of the banks 1,51,101, 151,etc. This can be a problem if, say you are scanning 3 banks and one is real busy.
Note: If you selected all frequencies to be skipped within the search range, the scanner beeps 3 times when you try to search. Number Keys Enter a channel or a frequency; turn groups on and off in search mode; select which banks to scan in scanning mode; enter numbers or characters for programming text. These settings, called Open Mode and Closed. This scanner can't monitor digital systems. Newsgroups and Forums You will have to register for the groups.
That way, you dont have to waste a whole bank on a trunking system that has only 5 channels. Please Note: None of the files on this page are actually hosted or transmitted by this server. S-14 can only be assigned to Block 0. Battery Low Alert - warns you when battery power gets low by beeping about every 10 seconds. Changing Search Speeds The scanner has two search speeds when doing a Limit Search. To Turn scan lists on or off, while trunkscanning the bank, use the number keys to turn the scan list's number on or off.
Channel activity bars 20 total. Notice that size code S-12 uses 2 blocks. Instead of repeatedly hitting a letter key to get to the item you want, you can also type the first few letters of the item's name. Then, gently press and release the reset button. That way, you dont have to waste a whole bank on a trunking system that has only 5 channels. The scanner sends the data.
Should be list 1, location 1. To change the receive mode, repeatedly press. Note: The scanner automatically rounds the entered number to the nearest valid frequency. Understanding Trunking Trunking systems let a large group of 2-way radio users or even different groups of 2-way radio users efficiently use a set of frequencies. Granted, these radios aren't simple so you will have to spend some time on them but this manual will at least make it easier.
P will appear to the right of the channel if the priority feature is on. The radio will start at the lower frequency, go up to the upper frequency, and start over again. Turning On The Scanner And Setting the Squelch 1. If it's possible to continue even with the error e. To change the scan direction, press or.