All other trademarks are the properties of their respective owners. Take the appropriate measures when such a message appears. Specifications Item Specification Product name Liquid crystal projector Panel size 2. The meanings of these symbols are described below. Pressing this button performs the following. Put the connector of the power cord into the 1. .
Holding Summary of the content on the page No. After reading, store this instruction manual in a safe place for future reference. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. If it is damage Summary of the content on the page No. Advertisement Print version Many people prefer to read the documents not on the screen, but in the printed version. The meanings of these symbols are described below. If this does not resolve the problem contact your dealer or service company.
If you want to quickly view the content of pages found on the following pages of the manual, you can use them. Angle Adjustment Use the foot adjuster on the bottom of the projector to adjust the projection angle. Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 10 degrees. Use the projector or remote control The input is not correctly set. Little space is required for installation and large images can easily be realized. Summary of the content on the page No. If the remote control starts to malfunction, try to replace the batteries.
With other cables, pins 12 , 15 are sometimes not connected. Please refer to the pages written following this symbol. Our company specializes in doing the best quality printing and binding of you manuals you can get. After reading them, store them in a safe place for future reference. An elevator foot is adjustable while pushing the elevator button on the same side as it. Our comb binding makes each manual easy to open lay flat and read, and you have the option to get a large or small easy to read book that is the full size of a sheet of paper, no longer will you have a hard time reading those small print manuals.
Please refer to the following illustrations to connect them. This projector has 2 elevator feet and 2 elevator buttons. After reading, store them in a safe place for future reference. If the projector should be dropped from the handle should be off, it could result in an injury, and continued use could result in fire or electrical shock. About this manual Various symbols are used in this manual. Holding the hook part of the battery 1. Refer to the number of display pixels above.
Then wait several seconds because the buttons may not function for these several seconds. About this manual Various symbols are used in this manual. The image will become darker, and hues will become weaker, after a lamp has been used for a long period of time. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. They may differ slightly from your projector. It is variable within 0˚ to 9˚ approximately.
Consult your dealer to connect with the Apple computer. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place. If repairs are possible, and desirable, they will be charged. Lamp Life Projector lamps have a finite life. Please bring it to the service station. Brightness , c ontr Ast , g Amm A, Contents. Use of some of these modes will not be possible with this projector.
Arrangement Refer to the illustrations and tables below to determine screen size and projection distance. Clean the air filter with a vacuum cleaner. After reading them, store them in a safe place for future reference. For some modes, the optional Mac adapter is necessary. Less Than 1W in Power Saving Standby. Summary of the content on the page No.
However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase. After reading them, store them in a safe place for future reference. Do not flourish the projector with the handle. A dialog will appear on the screen to aid you in adjusting the volume. Remove the lens cover, and set the power switch to 2.